Elpaso Home Improvement

Glass Door Repairs For Sliding Glass Doors

 If the sliding glass doors in your home are more than 10 years old, you might notice that they are becoming harder to slide open. This problem is even more common on aluminum frame dual pane doors. The reason is because the doors are heavier due to the dual pane glass, but many of the aluminum units did not use stainless steel rollers. So, in many cases, the rollers get rusty from moisture and they start to bind.

In order to replace the rollers, you have to remove the sliding panel from the opening. In most instances, the fixed panel must be removed in order for the sliding panel to come out. There is a simple way to determine whether or not your fixed panel has to come out as well. If the slider is on the inside track and the fixed panel is on the outside track, you have to remove both panels, because the slider will only come out from the outside. There is a lip on the bottom of the track inside your house. That lip keeps water from coming in. Unfortunately, that lip is also too high to lift the sliding panel up and over. So, you have to remove the fixed panel first, then lift and swing out the slider from outside. If you are one of the few people who have a slider on the outside track, then you can lift your slider out without removing the fixed panel.

But, let’s assume you need to remove the fixed panel first. Here is what you do: Remove your screen door if you have one. The screen door will have two rollers on the bottom. Lift one end of the door frame with one hand while using a flat screwdriver to lift the roller off the track. Do that on both sides, then take out the screen door and set it aside. Now, look for a metal piece on the bottom track that runs from the bottom corner of the fixed panel all the way across to the bottom of the side jamb that has the door lock hardware. If your door is really old that piece might be missing. If you have one, you can pry it up from the track. It is snapped in place even though it looks like it is a part of the track. Once you have that piece removed, you want to look inside the house where the fixed panel is against the wall jam. Look for screws holding the frame to the jam. They usually have one near the top and bottom corners, and one near the center. Remove these screws and put them where you won’t lose them. Now, you should be able to pull the fixed panel out of the side jam. There is a very good chance that it will be stuck. If it is, grab the center rail near the bottom and lift up as hard as you can. If you feel the panel go up, pull it back down. Do this a couple of times, then try to pull it out of the side jam again. This usually loosens it enough to pull it out. If it still won’t come out, you will have to put a thin screwdriver between the fixed panel frame and the side jam and pry while a helper pulls the panel away from the jam. Once you get it free of the side jam, grab the fixed panel side rail and have a helper grab the other rail. Lift the panel up into the top track and swing the bottom out of the bottom track. Remove the panel from the top track and set it aside with the screen door.

Now, you can try lifting the slider up and out, just like you did with the fixed panel. If the slider won’t clear the bottom track, you need to do a couple of things. First, look to see if it’s the old rollers protruding from the bottom that is preventing the door from coming out, or if the actual bottom of the door frame is hitting the track. In almost all cases, it will be the old rollers. But, if the opening is 8′ wide, sometimes the wood header that runs across the opening has sagged just enough to make it tight in the center of the opening. If it’s the rollers, you need to adjust them all the way up into the door. Look for a hole on the bottom side where you can put a phillips screwdriver and find the adjustment screw. Then turn that screw counterclockwise as far as you can. Do that to both sides, then try lifting out the door. If you are still getting stuck, have your helper lift one side and pull outward while you try to pry the frame and roller over the track. If you get one side out, have your helper hold that side with his or her foot to prevent it from going back in while he or she lifts the other side for you to pry free.

Once you get the slider out, almost all rollers are held in place by the same screw that holds the frame corners together. So, you need to set the panel on one side, remove the screw in the corner, flip the panel over, remove the screw on the other bottom corner. Now, you can take a rubber mallet or the wood handle of a hammer, and tap the bottom frame off the glass. This will give you access to your rollers. Take a close look at how they are inserted into the door frame. In fact, it’s a good idea to only remove one roller to bring with you to match for the new ones. Then, when you get back home, you can use the roller that is still in place as a guide to installing the new ones.

Places like Home Depot, Lowes, and Ace Hardware carry about 80-90% of the rollers out there. So, you should be able to find them. However, let’s say this just isn’t your lucky day, and you can’t find your rollers anywhere. You are going to have to have them ordered. Bring the roller to your local glass shop. If you’re lucky, they will have them in stock. If not, they can order the rollers, but you won’t get them for about a week. Don’t panic. Just go home and tap the bottom frame back on the door panel, but leave the corner screws out. You can even leave the roller out that you removed. Lift the door back in place, install the fixed panel but don’t snap the bottom piece back in, and don’t install the inside screws. Then, from inside the house, lift the slider and pull it closed. You don’t want to drag it if you left the roller out. It will scrape the bottom track. Just lift it enough to take the pressure off, and close and lock it.

When Your new rollers come in, take everything back out and install the new rollers. Adjust the new rollers all the way up before putting the door back in. That way, the new rollers won’t interfere with you lifting it back in place. Adjust the new rollers down until the door slides good and locks. You want to be sure there is an equal gap at the top and bottom when the door is about an inch from closing into the side jam. You can adjust the rollers to make this dimension even. If you can get the job done by a professional for $50 or $60 including parts, it might be worth hiring someone to do it. But, in high population areas such as Los Angeles, it’s common to pay $100 in labor only. Then they mark up the cost of the rollers, and you could wind up spending $130 for a job that you can do yourself for about $20.

Basement Waterproofing

Basement Waterproofing Basement waterproofing is one thing that homeowners should think about doing when they want to get rid of water coming into their home causing mold and mildew formation in different areas of the house. This is the process by which different techniques and methods such as sealers and drainage systems are used to stop water from seeping through the floor and walls. Once the basement sealing is complete, mold removal can begin.

Having mold in the home is always a nightmare for any homeowner. Usually when the mold or mildew are noticed by the homeowner, it is too late because there are so many of them and it would take a lot of effort and money to do mold removal.

Homeowners should realize that mold and mildew are a health hazard. They bring in pathogens and other microorganisms that may infect the body and make the residents of the home ill. There can be a lot of serious health hazards by having mildew and mold in the home.

Mold goes into the home as tiny spores. They are carried into the house by humans, animals, and even just the air that comes into your windows. This is initially harmless but mold removal is needed when these spores take in the moisture that is found in the house so that they can multiply and grow. Molds can grow on almost any surface in the house – wood, rock, carpet, tiles, and wallpaper, among others. Even dusty surfaces can serve as homes for molds.

Basement waterproofing is then needed in order to put a stop to the growth and multiplication of mold and mildew around the house. Usually, most of the water and moisture that the home acquires is from the basement, especially if the house is laid on an area where there is high hydrostatic pressure and high levels of ground water.

If you do not take action so that you home can have basement waterproofing, water intrusion will be high and you can expect to have molds and mildew in and around your basement and other areas of your home. This can then compromise the integrity of your home, your house’s foundation, and put lesser value on your place. Most of the time foundation repair is not enough. You really have to nip the problem in the bud before it even happens.

You can try using sealers that you can buy from the hardware store. These are easy to use and are considered a quick solution to the problem. However, you may also opt to use interior and exterior systems that allow better water drainage. These systems are better done by professionals while you are constructing your home.

Sometimes, the repairmen can do the necessary adjustments or installation of these systems when the problem arises but they might cost a little more because they need to evaluate your area first. However, this should not be much of a problem at all if it means that you are safe from a possible health hazard. Talk to a basement waterproofing specialist for an evaluation of your lower level and find out if you need mold and mildew removal to get rid of these health hazards.

Get An Instant Garage For Your Car

 Instant garages come in very handy as you can assemble and disassemble them easily. You can travel with it or prop it up when need arises. They are easy to clean and to store and can last for very many years. Because you can take them with you, you can use them for various activities and not just for putting your car.

These easy to use garages come in various styles. Some have round roofs while others are horizontal or have an A frame/design. The top of the garage can have a soft or hard material depending on what you want. The design can also allow you to attach it to your house and one would not be able to know if it is portable or not. In addition, you can get a freestanding instant garage that can be placed anywhere in your compound. Just because it is freestanding, it does not mean that it is not as sturdy or is likely to fall. It is designed to stand strong for long periods.

There are many companies where you can get an instant garage. Each manufacturer has a trademark style that you can identify and there are many to choose from. They vary in material used, size, width, length, height and overall design.

If you do not find a design that suits your needs, you can choose one that you like then have it modified to suit your needs. They can also make one from scratch to suit what you want. All you have to do is specify the material and proper dimensions. This can come in handy especially if you intend to use it for other purposes on top of keeping your car in it. Make a point of specifying the intended use so that the resulting garage will be perfectly suited for all your needs.

Either you can have it assembled for you or you can put it up yourself. To aid those who wish to put them up themselves, they come with kits complete with a manual and a few necessary tools. If you do not get a kit with tools there is no major need to worry, as you will probably need simple tools such as a hammer and screwdriver that you can easily get.

You can cut down on costs by simply buying the garage cover then make the supporting materials yourself. If you wish to do so you can get help from the company as with regard to design or you can shop online for a more designs.

If there is not a local company near you that deals with instant garages, you can go online and browse for such companies. You will find a huge variety to choose from, so take advantage and make comparisons. Settle on one that has the best deal for you then have the garage shipped over.

Despite the fact that an instant garage is not part of your home security system, the garage will act as a safe and secure place to keep your items. However, it is advisable to have them close to the house where you can easily monitor them.

Choosing the Your Furniture at the Furniture Store

When you are shopping for furniture, you can save a lot of time, and sometimes money, if you know which stores are the best for the items you are seeking. Many all-purpose stores carry at least some of each type of furniture, but most do not have a large selection of anything but conventional furniture. These are still good stores at which to shop, if only because you can get everything in one stop. However, if you have your heart set on a particular look, style or type of item, it’s a good idea to look a little further.


Traditional, or conventional, furniture stores often stock the latest styles in bedroom sets, living room furnishings, and dining sets. Some may also specialize in one type of item, say couches and chairs of every type, or mattresses and bedroom sets, but these are usually still in the traditional styles that you can pick up at many stores. These stores are great if you wish a general, classic look to your furnishings, and a wide selection to choose from.


Speciality furniture stores include those that bring in various furnishings and accessories from different countries. Perhaps you don’t want your entire home to have an exotic look, but would love to have a footstool or kitchen dining set that was made in a foreign country. If that is the case, these specialty furniture stores usually carry unique, or at least unusual, items with which you can accent your home. Many of these items can only be reliably found in furniture stores that deal in imports, though when you shop online sometimes you can even buy them direct from where they are made.


Furniture stores that specialize in office furniture have become more popular over the years. Not only do traditional offices sometimes need to update their furnishings, or outfit an office from the ground up, but more and more people are furnishing home offices. Typing at the kitchen table can get the job done, but doing your work at a desk while sitting in a comfortable chair causes less strain on your body. If you are thinking of furnishing a home office or a traditional office, an office furniture store is your best bet for a good selection.

Infants and Children

Buying furniture for infants and children can be a pleasant experience, particularly if you visit stores that cater to them. You can usually find children’s furnishings at department stores and traditional furniture stores, but the selection is not as wide, and you may need items that they don’t carry. When you browse the aisles of an offline or online store that caters to children, however, you realize how simple it is to just choose the items you need. Good children’s furniture stores will often carry items that you may need for children from infancy to the teen years.

Buying furniture is an investment and it only makes that you make the most of both your money and time. You can do this by seeking out the stores that will fulfill your needs in the best, most efficient manner.

Generate Some Cash By Creating Space In Your Home

It’s a fact that many people live with more items in their home than they actually need and this leads to the feeling of not having enough space around the house. If you want to improve your living circumstances, you might want to seriously consider removing the clutter in your home. In the event your home is more tidy, it is simpler to relax and you will not have that worry of an unexpected visitor dropping in before you have the chance to move things from one room to another. It also makes your house easier to clean and more presentable if you choose to sell.

If it is a challenge to get rid of the stuff in your home, you may want to consider trying to sell the stuff that you don’t need. One class of stuff that you could sell are dated electronic equipment that you may have in storage like old computers, TVs or game systems. The fact that you no longer utilize these yourself doesn’t suggest that they are of no value to someone else. The fact that people have their own personal needs and financial constraints means that your old television may be snapped up by someone whose circumstances are different to yours.

If you have children, it is likely you have a lot of the clothes and toys and games that they once wore in storage. You almost certainly amassed a lot of stuff for your children but you can probably sell them for a nice price if you know where to take them. There are times when you want to keep certain items for sentimental reasons and that is okay as long as you are sensible about it. If you make a bit of effort, you will be able to sell the majority of the stuff you don’t need and still keep things that may be of sentimental value.

There might be some items that you could need for the future or can be a replacement later like pictures or mirrors. Yet at the same time, if you’re not using it at this point, you probably won’t use it later so selling them will earn some cash and add new space to your home. Additionally, may very well not recognize that you have something of more value that is interesting to a collector and you can easily do some research online to see if you are sitting on something that could bring you a nice windfall.

There are lots of avenues to sell your possessions online like auction sites and specialty websites. Obviously, you could potentially put an advert in your local newspaper or have a garage sale. The effort to eliminate your clutter can not only provide you with much needed space but you are going to have more cash in your hand as well.

Home Improvement Guidelines to Help Make Your House A Home

homeWhen contemplating home improvements there are so many possibilities as to what materials you can use, what you will do, and how you can apply your ideas in to your own home. It is rare to find somebody that will do the exact same thing as you. It is important that in home remodeling that you create a job that works for your home and family. This article will help you accomplish this.

One of the biggest causes of failure in a do it yourself home improvement project is to start more than one project at a time. When you focus your efforts on one area, you end up with better results and a better success rate of finishing your project. Also, you have more usable space while renovating if only one area of the home is in progress at one time. If you are a home owner with little patients it is often best to hire in a general contractor to take on multiple projects.

If your renovations are headed to the exterior of your home, don’t neglect the garage door. In many homes, the garage door is the biggest single architecture feature of a home as it is viewed from the street. A new garage door or even just a coat of paint on the old door can really make a difference. Another aspect that is often overlooked is a garage door opener. This is another inexpensive improvement that will truly be worth its weight in gold, especially on those rainy days.

While attending to home improvement on your home, remember that while personalizing a room to your own individual taste is great, the expense may not necessarily be recouped at the time of resale. Expensive wallpapers or tiles that suit your taste may be viewed for discarding by the next purchaser and therefore the cost will not be recovered. If you are new to the home and plan on living there for some time this issue might not matter so much however if you are doing home renovations in order to sell the home it is best to keep it simple and neutral.

Displaying books in your living area can be a great sign of intelligence as well as a nice decorating accessory. Make sure when you’re displaying your books to arrange them according to height and color. Not arranging books according to height will make your collection appear messy and unorganized. Arranging your books by color will make your area seem sophisticated. Though this adds uniqueness to your home and style so if you are interested in adding a bit of randomness to a room that is very neutral and a bit sterile some mix matched books can add interest.

Isn’t creating your own home improvement job fun? As you have seen in this article, there are a lot of ways this can be done and no two techniques or products will yield the same results. There are also lots of customizable options that can work with your home and budget. Adding your personal twist and flair to your home environment will make your house a home that will yield years of enjoyment.

How To Refinish Your Kitchen

If you love your kitchen appliances or if you just don’t want to, or can’t afford to replace them, consider porcelain refinishing to give your kitchen a new look. Giving your major appliance a new finish can make it look new or almost new.

Why replace a perfectly good Avocado refrigerator or Coppertone stove just because color trends have changed? Face is most appliances, particular the older models, were built to last for years. But they also have ceramic and enameled parts. These can easily chip, warp or rust. Even the best of models will fade over the years.

Appliance refinishing consists of resurfacing the porcelain finish into a newer durable color. Consider refinishing your appliances to give an older, or even antique model a new stylish look. Replace a few fixtures or knobs, and along the way you can save some money.

You can have your appliances professionally refinished. But you can also save money by doing it yourself. For the most part all it takes is a good cleaning and a paint sprayer.

If you want to take on the project of refinishing your home appliances, here are a few simple steps to follow.

The appliance should be moved to a good working area, such as a garage where you have good light and ventilation.

Clean all the surfaces of the appliance you are wishing to refinish. Use dish soap, water and a good scrubber. This is important because the paint will not adhere to a surface that is dirty or greasy. Rinse well with a sponge and water, then towel dry. You’ll want the appliance to be completely dry before you begin the paint process.

Using plastic sheeting build a paint booth around your appliance. Carefully mask off all the sides and the floor. If you’re refinishing more than one appliance, make sure the appliance is accessible from all sides.

Wearing safety gloves and eye protection, use acetone to wipe down the appliance. This will remove any remaining residues on the appliances.

Using medium grade the fine grade sandpaper completely sand the appliance. Give special attention to any areas covered with rust. Use a shop-vac to get rid of all the dust. Wipe the unit down with rags. You don’t want any remaining dust to mar the surface.

Where you can, remove handles, glass, knobs, logos, and any other area that should not be painted. Carefully mask off any areas that should not be painted. That includes any metal surfaces not intended for porcelain paint.

Apply a rust inhibitor, or a rust converter for stoves and a primer recommended by the manufacturer of your appliance.

Use a paint sprayer to paint the appliance. Be sure to follow the manufacturers’ instructions on the paint sprayer to get the right mixture and pressure for painting. You can use spray cans for your appliances, but you run the risk of a less professional appearance on your appliance.

Give the appliance at least three to four thin coats of paint. Make sure you are using the specialty paints designed fro appliances and designed for high temperatures. That’s not the cans of paint you can pick up easily at the big box store. They may carry what you need, but do your homework and get the right pain.

Don’t spray heavy coats of paint on the appliance because the paint will have a tendency to run and mar the finish. If you are painting a stove, you’ll want to add a coat of clear to achieve a glossy finish.

Painting may take you several days. Each coat of paint should be allowed to dry thoroughly before applying the next coat. That could be 2-3 days for a refrigerator and up to 5-8 for a stove.

Which Is The Perfect Chandelier For Your Home

Chandeliers are ornamental or decorative lighting fixtures which are used for ceiling lighting. Usually, chandeliers are centerpieces in big halls, churches, public galleries, palaces, hotels, mansions, etc. Common residential homes also have low-cost chandeliers in the living room which are simpler variations of the chandeliers. The ones present in homes are usually much less extravagant as the ones seen in public and also commercial buildings. Chandeliers could be lit utilizing candle lights, incandescent lights and through energy saving bulbs. The vintage and traditional type of chandeliers utilize candle lights or incandescent lights for illumination and in addition have yellow tinted illumination. Even as trendy chandeliers contain fluorescent or LED light bulbs, and they produce white-colored luminescence. Illuminating chandeliers using candle lights is not practically possible on an everyday basis, that’s why, newer chandeliers come with electric bulbs that can be made to appear like candle lights.

Chandeliers have been in use from the medieval times i.e., from the sixteenth century and they are believed to have come from European regions. In olden days, crystals, glasses and also ceramics were utilized to build chandeliers of different shape and size. The chandeliers have metallic divisions, which usually fit the light holders. The metallic branches are usually heavily decorated using art work and designing. The common chandeliers include flower, leaf and creeper styles on the metallic branches. But, the latest chandeliers display hip and trendy art work. The category of chandeliers is dependant on the materials that are used to make them. Many of the chandeliers are white in colour since the lighting effect in chandeliers is by refraction of light from the crystals and glasses utilized, yet, you will find black chandeliers, that happen to be quite popular because they portray a fascinating look. Multiple sorts of chandeliers have been discussed below.

Crystal Chandeliers: The most expensive and luxurious chandeliers are made of crystals. They are the most traditional form of chandeliers and manufacturers of modern chandeliers hardly use crystals. This is because commoners prefer cheap chandeliers and modern chandeliers over the more extravagant ones.

Ceramic Chandeliers: The next most expensive chandeliers are the ceramic chandeliers which are made of porcelain. Ceramic chandeliers are mostly manufactured in China and traded all over the world. The Netherlands also have porcelain factories that manufacture ceramic chandeliers.

Glass Chandeliers: The cheapest alternative for crystals is glass; hence glass is used to make cheap chandeliers. Most of the modern chandeliers have glass shades and domes. By and large white or yellow coloured glasses are used to make glass chandeliers. But there are also multi coloured chandeliers where stained glasses are used.

Metal Chandeliers: Metal chandeliers are also comparatively cheaper and can be categorized under cheap chandeliers. Metals like puffed iron, aluminum, steel, brass, etc are used to make metal chandeliers.

Black Chandeliers: Black chandeliers are by and large manufactured in China and Czech Republic. The black chandeliers are preferred by people because of the contrast they exhibit with the white lights. The black chandeliers are made of black crystals, glasses and wrought iron. Black chandeliers go well with Vintage style of settings and interior decorations.

How To Do Interior Decoration On Your Own

Do you think your home needs to be made over? Do you think this color and that color have outgrown their welcome after you’ve lived with it for more years than you can count? Do you think your furniture and furnishings already need to be changed because they’re just too old? What about your office? Do you think it would do your business a lot of good if you discard your old look and have an office makeover? Changes should be the order of business if these questions keep swirling around in your head.

Now you’ll have the problem of working out who will spearhead or oversee the entire process. It is going to be quite a lot of work that would require a lot of time, time that you can’t spare. After all, you have your own job, your family and other obligations to see to. The answer, then, would be to hire a professional interior decorator.

It is not a bad idea at all, really. A professional interior decorator will practically do all the work, from the planning stage to the removal of the old ones and picking of new furniture and fixtures and finally arranging them in accordance with the new design. Although he will do all the dirty work, you will still get to have the final say or seal of approval in everything. At the end, you simply write the check and thank him for doing his job.

However, that method would mean relinquishing most of the choices to him. What about your own decoration ideas? That is why it would be best if you still do most, if not all, the interior decoration on your own. Exhausting and time-consuming though it may be, but personally overseeing it and doing the dirty work would give you more fulfillment and satisfaction in the end.

What do you have to be aware of when you tackle do-it-yourself interior decoration? If you learn the basics of decorating, you’d be off to a good start. There are a wide variety of publications that you can refer to for thoughts on these ideas and principles. There are also a lot of online resources. You’ll be amazed at the huge amount of ingenious tips and tricks on how you can better decorate your space.

Look at your resources first. You must assess that actual space that you have to decorate. It is important that you have a general idea on the direction you want to go. You should also name a ballpark figure on how much you are willing to spend on the decorating project. Make an inventory of the things you need and draw up a floor plan.

Incorporate what you’ve learned about the basics of decorating in your inventory plan. If you stick to a theme, you are more likely to keep to a consistent rhythm throughout the space. Aside from taking note of scale, contrast should also be taken into account. The texture and pattern of materials and fabrics are also very important.

Try doing your own interior decoration and be amazed at the endless and limitless possibilities. You should not be bound by decorating rules. Let your creative juices flow. Remember that the recipient of the benefits of the room you are decorating is you, so do what you think will satisfy you.

Best Appliances For Your Outdoor Kitchen

There is nothing quite like a warm summer evening where family and friends dine together outside. Having your own outdoor kitchen can enhance that experience. Sure, an outdoor kitchen may be more practical in more temperate climates, but they can be built anywhere you love to barbecue, grill or cook outdoors.

There are plenty of outdoor kitchen appliances to make your time more enjoyable. While Ill you really need is a grill and place to eat, other appliances designed specifically for outdoor cooking and dining can enhance that experience.

Benefits to having an outdoor kitchen include the added enjoyment and even health benefits of grilled food. You’ll enjoy more social time with friends and family, some added convenience. And, the cooking smells, while wonderful at the time, won’t linger in your drapes and carpet.

So, if you’re going to invest in an outdoor kitchen, you want to look for the best and most durable appliances your budget will allow for. Your outdoor appliances need to be stronger and built well in order to withstand nature’s moods. They’ll need to be built and coated in a way to withstand snow, rain and sunshine.

Just like any other home improvement, you can invest as much as you want. Make sure you think this through before you build and area that you really won’t use. If you only cook outside once or twice a week, maybe you don’t need all of the extras. You can get by with a sturdy grill and some storage space. On the other hand, if you choose to have as many outdoor meals as possible, you’ll want a dining space as well as things like a sink or refrigerator.

In general, outdoor kitchens would include the following appliances: a grill, a rotisserie, a refrigerator, an open top stove and a sink.

But if you’re really serious about this outdoor cooking and entertaining area, you may want to add some of the following.

For anywhere from $180-2000 you can add a built-in icemaker. That means no more trips to the convenience store for bags of ice. A built-in icemaker can blend seamlessly into your outdoor cabinetry and can produce up to 25 lbs. of ice per day. Remember that you’ll have to add the cost of having a plumber tie this into your home’s water supply.

The serious pizza aficionado you can add can add a pizza oven for as little as $700 or as much as $6,000. Gas or wood-fired pizza ovens are becoming increasingly popular as people embrace the charm of a Tuscan-style pizza experience.

What could enhance your entertaining experience more than an endless supply of ice-cold beer on tap? Beer dispensers, or kegerators, can chill and dispense beer from a keg. Less costly indoor versions are available for as little as $400 but expect to spend over $1,000 for an outdoor version. You’ll want to make sure that kegs are readily available in your area. And keep in mind, a full keg of beer is pretty heavy.

If the weather gets cool in the evenings, or if you like to entertain on those brisk afternoons, consider a patio heater. They don’t add to the food or beverage experience, but they can add to the time you spend outdoors. A patio heater won’t turn a chilly winter evening into a tropical paradise, but one can add about 10 degrees to the ambient outdoor temperature.

Before you begin purchasing appliances, take a good assessment of your electric, water and natural-gas needs for your outdoor kitchen. Be sure to check local codes for regulations about burying lines. Your building inspector and contractor should know the requirements for your area.

Scroll To Top